※商品ページ内で使われている画像はすべて適合モデル以外を使用して撮影したものです。購入時には適合機種を確認の上選択してください。 ※商品の色合いやイメージは商品撮影時の環境や、お客様ご使用のディスプレイ環境により実物と多少の相違が生じることがございます予め、ご了承お願い申し上げます。 ●メール便での発送となりますが破損等の保証はできません。 ●商品につきましては、細かい傷などありますが、ご了承ください。 ●メール便はポスト投函となりますので、日時の指定はできません! 【Instructions for Using the Diving Case】 Installing the Diving Case:Step 1:Unlock the three latch switches.Step 2:Open the battery cover, install two 7# batteries, and seal the battery cover. Please ensure correct polarity. Note: This product does not include batteries; please purchase two 7# batteries separately.Step 3:Turn on the power switch to the ON position, the blue indicator light will flash.Step 4:Enable Bluetooth on your phone and search for visible devices. Find the device named "SFK-05(BLE)" and connect to it. Once connected successfully, the blue indicator light will turn off.Step 5:Open the assistive touch feature in phone settings by navigating to "Settings" -> "Accessibility" -> "Touch" -> "Assistive Touch" and turn it on.Step 6:Push the clip open, place your phone inside the diving case, then move the clip to the middle to secure the phone.Step 7:Thoroughly check the waterproof seal for cleanliness and absence of debris or damage. Close the case cover and fasten the locking latch.Step 8:Use the vacuum pump device: a. Unscrew the cover of the vacuum pump device counterclockwise, ensuring all components are clean. b. Press the waterproof air valve at the connection of the vacuum pump, pump up and down 3-4 times, then cover the air valve.Note: After using the vacuum pump device, conduct a test before diving. If the case cover cannot be opened, it indicates successful vacuum suction.Step 9:Hang the diving case with the included rope.Step 10:Press the direction button on the diving case to activate and locate the touchscreen on the phone. Please be patient while finding it.Removing the Phone:Step 1: Twist open the back cover, gently move the silicone pad to release the air. Step 2: Unlock the three latch switches and push the clip to both sides.Step 3: Remove your phone.
iphone 14
iphone 14pro
iphone 14pro max
iphone 14plus
iphone 13
iphone 13pro
iphone 13pro max
iphone 13mini
iphone 12
iphone 12pro
iphone 12pro max
iphone 12mini
iphone 11
iphone 11pro
iphone 11pro max
iphone xr
iphone xs max
iphone x/xs
●Galaxy
galaxy s24
galaxy s24 plus
galaxy s24 ultra
galaxy s23
galaxy s23 plus
galaxy s23 ultra
galaxy s22
galaxy s22 plus
galaxy s22 ultra
【プロの防水】最大潜水深さ:30メートル、 IPX8標準防水レベル。 背面カメラと前面カメラを使用して、写真やビデオを撮影できます。 反射することなく非常に鮮明な写真が得られます。 水中では、他の電話機能を使用できません。
【フルボディプロテクション】フルボディ密閉設計で。潜水用の防水ケースは耐雪性、耐衝撃性、耐落下性があり、あらゆる過酷な環境に適応する頑丈なものです。
※商品の色合いやイメージは商品撮影時の環境や、お客様ご使用のディスプレイ環境により実物と多少の相違が生じることがございます予め、ご了承お願い申し上げます。
●メール便での発送となりますが破損等の保証はできません。
●商品につきましては、細かい傷などありますが、ご了承ください。
●メール便はポスト投函となりますので、日時の指定はできません!
【Instructions for Using the Diving Case】
Installing the Diving Case:Step 1:Unlock the three latch switches.Step 2:Open the battery cover, install two 7# batteries, and seal the battery cover. Please ensure correct polarity. Note: This product does not include batteries; please purchase two 7# batteries separately.Step 3:Turn on the power switch to the ON position, the blue indicator light will flash.Step 4:Enable Bluetooth on your phone and search for visible devices. Find the device named "SFK-05(BLE)" and connect to it. Once connected successfully, the blue indicator light will turn off.Step 5:Open the assistive touch feature in phone settings by navigating to "Settings" -> "Accessibility" -> "Touch" -> "Assistive Touch" and turn it on.Step 6:Push the clip open, place your phone inside the diving case, then move the clip to the middle to secure the phone.Step 7:Thoroughly check the waterproof seal for cleanliness and absence of debris or damage. Close the case cover and fasten the locking latch.Step 8:Use the vacuum pump device: a. Unscrew the cover of the vacuum pump device counterclockwise, ensuring all components are clean. b. Press the waterproof air valve at the connection of the vacuum pump, pump up and down 3-4 times, then cover the air valve.Note: After using the vacuum pump device, conduct a test before diving. If the case cover cannot be opened, it indicates successful vacuum suction.Step 9:Hang the diving case with the included rope.Step 10:Press the direction button on the diving case to activate and locate the touchscreen on the phone. Please be patient while finding it.Removing the Phone:Step 1: Twist open the back cover, gently move the silicone pad to release the air. Step 2: Unlock the three latch switches and push the clip to both sides.Step 3: Remove your phone.